реклама
ОНЛАЙН АПТЕКА НИЗКИХ ЦЕН
цены ниже розничных точек. доставка по украине

   Любые виды проектных, дизайнерских и строительных работ в Украине и Киеве    
реклама

подписаться на новости  proxy  статьи  библиотека  softice  free_юр.консультация  hard  chat
рекламодателям  фирмы/add  расшифровка штрих-кодов  форум  links/add

http://kiev-security.org.ua

CD32 Keyboard to Serial Interface 1

For the signal-translation form the 0-5VDC source to the standard
RS232-level (-12VDC / +12VDC) you may choose the MAX232 or an
equivalent counterpart (ICL232 ....)
CD32 Keyboard-Port      level-converter TTL->RS232     RS232

Pin4 +5V -------------Pin16
Pin3 GND -------------Pin15--------------------------GND Pin7
Pin2 TxD ------------>Pin10  (---|>*-)  Pin7-------->RxD Pin3
Pin6 RxD <------------Pin9   (--*<|--)  Pin8<--------Txd Pin2
               C1
             +--)|----Pin1                      +----DSR Pin6
             |    +                         (*) |
             +--------Pin3                      +----DCD Pin8
               C2                               |
             +--)|----Pin4                      +----DTR Pin20
             |    +
             +--------Pin5                      +----RTS Pin4
               C3                           (*) |
           GND--|(----Pin6                      +----CTS Pin5
               +    (Polung!)

               C4
           GND--)|----Pin16          (*) some computers need these
                  +                  handshake connections to
               C5                    proper working
             +--|(----Pin16
             | +    (Polung!)
             +--------Pin2

                          (**)
shielding-----------------------------------------| |-shielding

connect the shielding of all cables to each other - but only
connect it to only ONE interface port connector (i used the
keyboard plug).

For the condensers C1..C5 you must get 1 uF electrolyt-condesers.
If your signal-converter is kind of the xxx232A (A-type) you must
use 0.1 uF instead (for C1..C5)       [source : Maxim Data Book]

Be careful with your explorations. I suggest the serial signals
are passed through directly to the PAULA chip - so they are
slightly sensitive.

HOME


Если у вас есть сайт или домашняя страничка - поддержите пожайлуста наш ресурс, поставьте себе кнопочку, скопировав этот код:

<a href="http://kiev-security.org.ua" title="Самый большой объем в сети онлайн инф-ции по безопасности на rus" target="_blank"><img src="http://kiev-security.org.ua/88x31.gif" width="88" height="31" border="0" alt="security,безопасность,библиотека"></a>

Кнопочка будет выглядеть вот так (1,516 байт):

kiev-security.org.ua
Идея проекта(C)Anton Morozov, Kiev, Ukraine, 1999-2011,
Hosted by Register.UA